Our Career

img

Career at TechnoLabs

Welcome to the Careers page of Semicon Technolabs and Services!

We are a leading training institute in the semiconductor industry and always on the lookout for passionate individuals who are committed to excellence and eager to learn. Our dynamic work environment encourages innovation and creativity, and we offer opportunities for growth and advancement through training programs, mentorship, and coaching.

If you are driven, innovative, and have a passion for excellence, we invite you to submit your resume and cover letter to our HR department. Join our experienced team of professionals and contribute to the development of the semiconductor industry.

DFT

  • Bengaluru / Noida
  • 2-10 years
  • BTECH/MTECH
Our Specifications:-
  • Chip-level DFT insertion with sound knowledge of scan compression, MBIST & JTAG techniques
  • Should have good post silicon DFT bringup and debug experience
  • Hands on in multi-vendor DFT tools
  • Create test plan for complex ASICs and drive the DFT implementation & verification
  • Ability to guide people, multiplex many issues and set priorities
Apply Now

RTL Design

  • Bengaluru / Noida
  • 2-10 years
  • BTECH/MTECH
Our Specifications:-
  • Hands on experience of coding in Verilog and VHDL.
  • Understanding of Power Intent, Power estimation and checks.
  • Experience of Design rule checks and Clock domain crossing checks using Spyglass or similar tool.
  • Specification writing.
  • IP RTL development experience.
  • Good knowledge of version control tools like Clearcase and Design sync.
Apply Now

Verification

  • Bengaluru / Noida
  • 3-15 years
  • BTECH/MTECH
Our Specifications:-
  • Expert in UVM/OVM for Verification
  • System verilog assertions
  • Perl
  • Functional + Code Coverage
  • Verilog and VHDL
  • Cadence IUS (preferred)or Mentor Questasim
  • Image Sensor knowledge is a plus
  • Experience with SPI/I2C is a plus
Apply Now

Physical Design (PD)

  • Bengaluru / Noida
  • 2-10 years
  • BTECH/MTECH
Our Specifications:-
  • Thorough understanding and knowledge of the entire Back end flow rtl to gdsii
  • Must be familiar with Industry standard tools like ICC/Encounter/Talus/Olympus
  • Should have expertise in Timing analysis and closure
  • Should have Tcl and perl scripting skills
  • Should have work experience in the latest technology nodes like 16nm/14nm
  • Should be familiar with low-power design and their impact on Back end flow
Apply Now

Synthesis/STA

  • Bengaluru / Noida
  • 3-12 years
  • BTECH/MTECH
Our Specifications:-
  • Should have good timing concepts and able to close timing of Block/SoC independently
  • Should have hands on experience in constraint generation
  • Hands on experience in Logical synthesis like Design compiler/ Rc compiler
  • Knowledge in Formal Verification. Comfortable with LEC/formality tools
  • Should able to generate and implement functional Ecos
  • Should have experience in Pre-layout and Post layout timing analysis in tools
  • Should have experience in two industry standard tools like Primetime/ETS
  • Hands on experience in crosstalk timing closure.
  • Knowledge in Path based analysis, AOCV, DMSA is a plus.
  • Knowledge in complete physical Design flow is a plus.
Apply Now

Synthesis/STA

  • Bengaluru / Noida
  • 3-12 years
  • BTECH/MTECH
Our Specifications:-
  • Should have good timing concepts and able to close timing of Block/SoC independently
  • Should have hands on experience in constraint generation
  • Hands on experience in Logical synthesis like Design compiler/ Rc compiler
  • Knowledge in Formal Verification. Comfortable with LEC/formality tools
  • Should able to generate and implement functional Ecos
  • Should have experience in Pre-layout and Post layout timing analysis in tools
  • Should have experience in two industry standard tools like Primetime/ETS
  • Hands on experience in crosstalk timing closure.
  • Knowledge in Path based analysis, AOCV, DMSA is a plus.
  • Knowledge in complete physical Design flow is a plus.
Apply Now

Analog Circuit Design

  • Bengaluru
  • 2-10 years
  • BTECH/MTECH
Our Specifications:-
  • Relevant experience in Analog & Mixed signal IO design.
  • Able to define or interpret the requirements into circuit designs.
  • Proven Analog Circuit design competency, like schematic generation and simulation on Cadence Tool sets. Worst case identification, top level simulation, Monte Carlo analysis, and simulation data analysis
  • Post layout parasitic extraction and simulation, Top level verification, block level modeling, top level simulation
  • Circuits include Linear Amplifiers, Drivers, Low-dropout regulators, Charge Pump-Regulators, Band gap and Buck/Boost converters, references, comparators.
  • Experience on High speed serial/parallel data links (multi Gb/s), PHY circuits,transceivers, PLLs, Clock and Data Recovery circuits.
  • Verify performance requirements using appropriate behavioural modeling, Spice simulation, and verification tools. Document designs and present reviews to peers.
  • Knowledge on Physical Design methods and issues.
Apply Now

FPGA

  • Bengaluru
  • 6-10 years
  • BTECH/MTECH
Our Specifications:-
  • Expertise in FPGA/SOPC Implementations
  • End-to-End FPGA/System Development
  • Expertise in Xilinx/Altera FPGA Implementation flow
  • Logic Estimation
  • FPGA Selection
Apply Now

RF layout

  • Bengaluru
  • 3-7 years
  • BTECH/MTECH
Our Specifications:-
  • BE or MTech in Electronics/Electrical engineering with 3+ years of work experience.
  • Candidate should be strong expertise in leading in one or more of the following IP Layouts.RF modules – LNA, TCA, Mixer, PA, VCO for WLAN, BT chip sets.
  • Candidate should have a strong knowledge on devices and process/fabricationtechnology.
  • Should have work experience in 65nm, 45nm, 28nm, 16/14nm etc
  • Good understating of Deep Submicro issues and layout techniques.
  • Expertise on matching, parasitic reduction, ESD, DFM etc.
  • Proficiency in use of below EDA tools for full custom layout and post-layout verification DRC/LVS/DFM etc.
  • Cadence Virtuoso Layout editor (L/XL/GXL)
  • Verification tools : Assura/PVS/Calibre/ Hercules
  • Scripting Knowledge of perl/shell/skill are highly preferred
Apply Now

AMS Verification

  • Bengaluru
  • 3+ years
  • BTECH/MTECH
Our Specifications:-
  • Understands System Verilog/Verilog well, even better if knows about real number modeling
  • Analog circuits knowledge ( the more the better, however, basic understanding is the bare minimum requirement)and spice syntax
  • Basic understanding of verification, stimulus generation
  • Pll , clocking and working knowledge of serial IOs is added advantage.
  • Prior experience of analog and mixed signal validation would help
  • Schematic building and simulation experience at minimum level is desirable.Preferably experienced in running XA tool.
Apply Now

Emulation

  • Bengaluru
  • 4-9 years
  • BTECH/MTECH
Our Specifications:-
  • Strong SOC RTL porting experience for Emulation device , specifically Synopsys Zebu platform
  • Experience in Verification Testbench setup and execution using VCS
  • Transactor integration experience in Emulation platform
  • Experience with LPDDR1/2, PCIe, UART/I2C, JTAG, Lauterbach
  • Good debug skills
Apply Now

System C

  • Bengaluru
  • 6+ years
  • BTECH/MTECH
Our Specifications:-
  • Good SystemC/ TLM knowledge and programming skills, proof point given in previous projects. System level integration experience
Apply Now

Please share CVs on careers@semicontechs.com